Stainless Steel Wing Seals
Stainless Steel wing seals are produced to hold tightly the stainless steel banding in place after tensioning of the banding around the cladding or insulation materials.
Manufactured from stainless steel 304 or 316. The base material is produced to the following specifications:
- Austenitic Stainless Steel ASTM A240 / ASTM A167 / EN10088-2
For further data on the Mechanical and physical properties of the stainless used see Product Data Sheet for stainless steel Banding available on request.
Standard wing seals are manufactured from stainless steel coil in the UK. Most common widths are ½” (13mm) and ¾” (19mm)
Other sizes available ⅝” (16mm), 1” (25mm), 1½” (40mm) and 2” (50mm)
Once the banding is thread through the seals and tightened with a tensioning tool, the wings are flattened either by hammer type tool. We offer 2 designs the traditional one manufactured from 0.8mm (0.031") or the Bandfix® Ecoseal with its unique patented design its 20% stronger but lighter due to its use of 0.7mm (0.027"), the improves the overall performace while reducing the amount of energy to manufacture and distribute and speed up application.
Bandfix® and BS Thermal™ are brands of BS Stainless Ltd