Saving the Planet — One Barrel at a TimeWhich Product Saves More Energy Than it Takes to Make itNickel Ore Restrictions - Philippines Follows Indonesia's LeadBrexit — What's Next for UK SteelMetal Jacketing and Golf Balls — What's the ConnectionStainless Steel Expansion and compression springsAluminium rivets to complement our rangeWhy a Surlyn® / Polyethylene moisture barrier is better than PolyKraftArchitectural Cladding — Forging The FutureSummer Project Start it the Right Way
Stainless Steel wing seals are produced to hold tightly the stainless steel banding in place after tensioning of the banding around the cladding or insulation materials.
Manufactured from stainless steel 304 or 316. The base material is produced to the following specifications:
For further data on the Mechanical and physical properties of the stainless used see Product Data Sheet for stainless steel Banding available on request.
Standard wing seals are manufactured from stainless steel coil in the UK. Most common widths are ½” (13mm) and ¾” (19mm)
Other sizes available ⅝” (16mm), 1” (25mm), 1½” (40mm) and 2” (50mm)
Once the banding is thread through the seals and tightened with a tensioning tool, the wings are flattened either by hammer type tool. We offer 2 designs the traditional one manufactured from 0.8mm (0.031") or the Bandfix® Ecoseal with its unique patented design its 20% stronger but lighter due to its use of 0.7mm (0.027"), the improves the overall performace while reducing the amount of energy to manufacture and distribute and speed up application.
Bandfix® and BS Thermal™ are brands of BS Stainless Ltd