Plysolene PIB is a waterproofing membrane for pipework and ventilation ductwork. Plysolene PIB has outstanding properties over a wide temperature range (-30°C to 100°C) it is used globally in oil refineries, chemical works, Petrochemical plants and power stations.
Plysolene is used by many contractors due to its ease of use, demanding joints and difficult shapes are simply cut and welded on site.
Plysolene PIB is produced from high molecular weight polyisobutylene, modified to achieve optimum properties.
It will not harden, its virtually non-ageing,ozone resistant and UV resistant.
|Thickness||Finish||Width||Length||Approx Roll Weight|
|0.8mm||Chalked||1000mm||15 metres||19 Kgs|
|0.8mm||Paper Interleaved||1000mm||15 metres||19 Kgs|
|0.5mm||Chalked||1000mm||25 metres||23 Kgs|
|0.8mm||White Chalked (For Internal Use Only)||1000mm||15 metres||19 Kgs|
|1.0mm||Chalked||1000mm||15 metres||24 Kgs|
|1.0mm||Paper Interleaved||1000mm||15 metres||24 Kgs|
|1.2mm||Chalked||1000mm||12.5 metres||24 Kgs|
|1.2mm||Paper Interleaved||1000mm||12.5 metres||24 Kgs|
Plysolene PIB is generally unaffected by:
Hydrochloric Acid (dil & conc), Acetone, Sulphuric Acid (dil & conc), Acetic Acid, Aqueous Caustic Lime, Methanol and Ethanol, Aqueous Hydrosulphite, Formic Acid (dil & conc), Methyl Acetate, Copper Sulphate solutions, Sodium Chloride, Potassium Permanganate, Ethylene Glycol, Hydrogen Peroxide, Chromic Acid, Glycerine, Ethyl Acetate, Sulphonic Acid, Phenol, Chlorosulphuric Acid, Cyclohexone, Sodium Hydroxide (dil & conc), Ammonia, Naphthalene Sulphuric Acid, Solvents E13/E14.